STRONG LED strip 7.2W/m 12V 10mm cold white IP65

ATTENTION - this type of LED strip can only be lit for 2 hours at a time and then it must be at min. 30 minutes off, otherwise it may overplay and damage the chips. Application: elastic LED strip with highly luminous diodes per meter. LED type - 5050. Fixing with double-sided 3M adhesive tape. Light color: cool white. Width: 10mm. Thickness: 2.3mm. Power: 7.2W/m (30 diodes per 1m). Luminous flux: 585lm/m. after 5 m, expandable after 1 m (can be shortened in marked places by 3 diodes, every 10 cm, can also be connected again in these places). When taking shorter LED strips, cut to the nearest shorter dividing point. The tolerance is about 1 cm per meter of length. Connecting the cable: by soldering. Heat dissipation must be ensured during installation. Laminate, glass, etc. do not ensure sufficient heat dissipation, the LED strip overheats, shortens its life and can damage it. We recommend placement in the appropriate ALU profiles ensuring heat dissipation. Suitable profiles: LED SURFACE, LED GROOVE, LED CORNER, LED WIDE and the new profile with snap-on cap 182990. When using without these profiles, we recommend using aluminum strip 135156 for heat dissipation (d - 3000mm, w - 10mm, h - 2mm) for installation on laminate ). Waterproof IP65
To facilitate the ordering and calculation of the necessary components, a form is available where you can find all the accessories and you can also have custom assemblies made. You can find it at: formula

While stocks last