StrongGlue contact adhesive CONSTRUCTION, 500 ml spray
Contact adhesive glue StrongGlue CONSTRUCT with improved yield, improved resistance to high temperature and extremely strong bond.
Instructions: Shake before use. Make sure that the to-be-glued surfaces are dry and clean, free of dust, grease and other contamination. Adjust the spray nozzle to the desired sprayed glue ray width (H -M -L). Apply the adhesive in an even layer on the both surfaces, in distance approx. 7-15 cm from the surfaces to-be-bonded (the thiner the glue ray, the shorther the distance).
Wait for minimum 1 minute for solvent to evaporate. The moment of binding of glued surfaces can be postponed for up to 60 minutes. Once the glued surfaces are connected, press them together with utmost force. THE HIGHER FORCE, THE STRONGER BOND CREATED.
The full strength of the bond can be expected in 24 hours.
When finished, put the spray with noozle down and release all remaining glue.
WARNING:Designed for proffesional / industial use.
Parameters
| Parameter | Value |
|---|---|
| Content | 0,5 l |
| Type of contact adhesive | Spray adhesives |