StrongGlue Contact Adhesive DOUBLE ECO, 500 ml spray

Contact adhesive StrongGlue DOUBLE ECO is suitable for bonding absorbent and non-absorbent materials, especially HPL laminates and other flat materilas such as PB, MDF, melamine faced PB and others, as well as gluing edge tapes (ABS), manufacturing double-thick flat material boards, gluing natural- and synthetic- material carpets, homogenic PVC or PVC flooring with felt, heavy duty lino flooring, linoleum flooring. We strongly recommend to perform adhesive test to determine the quality of the resulting bond and the effect of the bonded materials on the adhesive prior to use.

Not recommended area of use: bonding softened PVC due to risk of migration of the glue plasticizer. The glue does not contain carcinogenic substances. The glue contains environmentally neutral solvents with no effect on the ozone layer. Please read the instructions for safe use.
Instructions: Adhesive StrongGlue DOUBLE ECO can be used at temperatures above 15°C. Shake before use. Hold the spray-can approx. 10-20 cm from the surface to be bonded. Apply the adhesive in an even layer in order to avoid forming any puddles. Apply the adhesive on the both surfaces, allow to set for 2-4 minutes and then press together with utmost force. Make sure that the to-be-glued surfaces are dry and clean, free of dust, grease and other contamination. You can reach the desired width of the adhesive to be applied by turning the nozzle, the width of the glue ray can be adjusted. Use the adhesive in well-ventilated rooms.